 |
ENGINE POWER: |
| At Fly wheel 65 HP |
OPERATING WEIGHT: |
| With 6.00 - 16 and 14.9/13-28 tyres, hydraulic lift with 3 - point linkage cat. 1 - 2, square type fenders with flat top: 1,770Kg. |
ENGINE: |
| Fiat 8035.05 |
| 4 - Stroke, Direct Injection Diesel. |
| Number of Cylinders: 3 |
| Bore and Stroke: 104 x 115 mm |
| Piston Displacement: 2,931 cu.cm |
| Compression Ratio: 17:1 |
| Max. Power at 2,500 Rpm: 65HP |
| Max. Torque at 1,500 Rpm: 22.7 Kgm |
| Dry-type Cylinder Liners. |
| Cooling System: Water |
| Three-row, brass tube and cooper fin radiator. |
| Force-feed lubrication system. |
| Distributor-type injection pump with mechanical speed governor. |
| Four-bearing crankshaft. |
| 12 Volt Starting System; 4 hp motor. |
| 400 Watt Alternator |
| 100/103 Ah battery, located in front of radiator. |
FILTERS: |
| 1) Air Filter: Oil-bath with pre-cleaner semiautomatic dust unloader; |
| 2) Fuel Filter: 2 replaceable cartridges; |
| 3) Oil Filter: Easy-to-change, full-flow cartridge. |
| Vertical exhaust muffler |
| Fuel tank capacity: 54 Liters |
CLUTCH: |
Dual Plate, dry type with separate controls (paddle for transmission and hand lever for PTO).
Diameter of plates: 11in |
TRANSMISSION: |
| Gearbox with constant-mesh gears: 8 forward and 2 reverse speeds. |
| Synchromesh on 3rd, 4th, 7th, and 8th speeds. |
| Differential with pedal actuated lock and automatic disconnection. |
| Single-reduction spur gear final drives. |
| Gear box mounted starter safety switch. |
BRAKES: |
| Service: Dry, band-type, mechanical control. |
| Parking: Manual lever on right side of operator. |
FRONT AXLE: |
| Telescopic type, inverted U, variable tread. |
TREADS: |
| Front (8 positions): |
1,320 - 1,420 - 1,520 - 1,620 - 1,720 - 1,820 - 1,920 - 2,020 mm |
| Rear (8 positions): |
1,200 - 1,300 - 1,400 - 1,500 - 1,600 - 1,700 - 1,800 - 2,900 mm |
STEERING: |
Hydro assisted, power steering with Independent Circuit, Turning radius:
- with brakes: 3.1 mm
- without brakes: 3.9mm |
DRIVER'S SEAT: |
| Cushioned Spring Suspension; adjustable. |
POWER TAKE-OFF: |
| 1 - 3/8" 6 spline shaft. |
| Fully independent: |
540 rpm at 1,967 engine rpm. |
| High-speed DTO* (1 - 3/8" Shaft): |
same speed as engine |
| (*) for application of belt pulley |
HYDRAULIC LIFT: |
- With draft and position control.
- Draft control through top link.
- Gear - type pump driven from engine crankshaft.
- Pump capacity: 22.7 liter / min.
- Relief valve opening pressure: 150 - 170 kg/sq.cm.
- Manual Response control.
- 3 - point linkage cat. 1 - 2
- Lower links with sway restrictors and transverse retaining spring.
- Control lever with safety stop.
- Max. Lifting capacity: 1,650 Kg |
TYRES: |
| Front: 6.00 - 16 |
| Rear: 14.9 / 13 - 28 |
BODY: |
| Hood with side-hinged cover for engine inspection. |
| Front grill is easily removable for quick access to air cleaner and battery. |
INSTRUMENT PANEL: |
| Separate temperature gauge, fuel gauge & tachometer. |
LIGHTING SYSTEM: |
- With 3 -position headlights.
- Head Lights Mounted in Front Grill.
- 2 pole power connector (ASAE).
- Blue high beam warning light on dashboard.
- Big Indicator, Parking & Hazard lights. |
SPEEDS (KPH): |
| With tyres |
14.9 / 13 - 28 |
| Forward Speed |
3.0 / 31.5 kmph |
| Reverse Speed |
4.3 / 15.5 kmph |
DIMENSIONS: |
| (with 6.00 - 16 and 14.9 / 13 - 28 tyres) |
mm |
| A Wheelbase |
1,920 |
| B Overall Length |
3,013 |
| C Height to top of hood |
1,390 |
| D Height to steering wheel |
1,490 |
| E Front tread (8 positions) |
1,320 + 2,020 |
| F Read Tread (8 positions) |
1,200 + 1,900 |
| G Ground clearance under front axle |
480 |
STANDARD EQUIPMENT: |
| Chain Stabilizers, Check Chains, Spring-suspension Seat, Flat Top Fenders, Standard Tool Box with set of Tools, Weight Frame without weights, Top Link, Cat-2 balls, Operator's manual |
OPTIONAL EQUIPMENT: |
- Front End Weights with Frame
- PTO Pulley (AGRIPAK Design)
- DTO Pulley
- AGRIPAK SunRoof Canopy (Fiber Glass/Hard Top)
- 9 Hole Draw Bar
- Pintle/Trolley Hook (AGRIPAK Design)
- DTO Suction Pump
- High Clearance Kit
- Driver's Cabin |
