New Holland Fiat 640 Tractors

New Holland Fiat 640 Tractors Specifications

 

fiat_480

fiat_640

fiat_640S

fiat_ghazi

PERFORMANCE:

Engine HP @ 2250 RPM 50 (BS)*
Max. Torque @ 1350 RPM 173.5 Nm (128 Lbf. ft.)
P.T.O HP @ rated Engine Speed 44 hp*
P.T.O HP @ 540 RPM 39 hp*
* Manufacturer's Estimate  

ENGINE:

Make/Model Perkins/AD 3.152
Type Diesel
No. of Cylinders 3
Injection Direct Injection
Bore 91.44 mm (3.6 in)
Stroke 127.0 mm (5.0 in)
Capacity 2.5 Litre (152.7 Cu. Ins.)
Compression Ratio 16.5:1
Starting Aid Thermostat
Cooling Water
Air Cleaner Oil Bath
Air pre-cleaner Over-bonnet

ELECTRICS:

Voltage 12 V, Negative Earth
Battery 96 Amp. Hour
Alternator 32 Amp
Starter 45 Amp

CLUTCH:

Type Dual
Diameter 254 x 305 mm (10 x 12 in)

POWER TAKE - OFF:

Type Live PTO
Speed 540 RPM @ 1789
Engine RPM  
Shaft Diameter 35 mm (1.375 in)
No. of Splines 6

TRANSMISSION:

No. of Gears 8 Forward, 2 Reverse  
Min/Max Road Speeds at Rated Engine Speed with 11 - 28 Wheels is 1.62/30.00 km per hour

HYDRAULICS:

Functions Draft Control
Piston Control
 
Response Control
 
Constant Pumping  
Max. Output (3.52 lmp.gal/min)
Max. Lift Force 16 litres/min.
At Lower link ends, 1415 Kg (3120 lbs.)
3 - Point Linkage Category 1 & 2 Interchangeable Balls

BRAKES:

Type Oil Board Drum Brakes Independent or locked together
Dimensions 355 mm x 50 mm (14 in x 2 in)

TYRES:

Front 6.00 - 16 (6PR) Pressed Wheels (4.5 x 16 Rim)
Rear 12.4/11 - 28 (6PR) Pressed Wheels

TRACK ADJUSTMENT:

In Increments of 101.6 mm (4 in.) 1.22 m - 1.93 m
Front (48 in.) - (76 in.)
Rear 1.32 m - 1.9 m
  (52 in.) - (75 in.)

DIMENTIONS:

(With 6.00 - 16 Front and 11 - 28 Rear Wheels and 52 ins. Track Setting)
Overall Length 3.21m (126 in) Links Horizontal
Overall Width 1626 mm (64 in)
Overall Height  
- To Top of Exhaust 2165 mm (85.25 in)
- To Steering Wheel 1400 mm (55.12 in)
Wheel Base 1.89 m (74.5 in)
Turning Circle  
- Using Brakes 5.56 m (219 in.)
- With out Brakes 6.20 m (244 in.)
Ground Clearance under  
- Clutch Housing 338 mm (13.31 in.)
- Front Axle 531 mm (20.9 in.)
- Rear Axle 555 mm (21.85 in.)

WEIGHTS:

(With 6.00 - 16 Front and 11 - 28 Rear Tyres in Running Condition)
Front Axle 695 Kgs (1532 lbs.)
Rear Axle 945 Kgs (2083 lbs.)
Total 1640 Kgs (3615 lbs.)

CAPACITIES:

Fuel Tank
52 litres
Engine Sump 6.8 litres
Hydraulics 32 litres
Steering Box 0.9 litres
Engine Cooling 10.2 litres

STANDARD FITTINGS:

Comprehensive Instrumentation: Flat Fenders with Handle and Protected Lights:
More Comfortable Spring Suspension Seat, Plough Lamp, Visible Number Plate, Warning Lights, Vertical Exhaust, Hand and Foot Accelerator, Differential Lock, Safety Start Switch, Adjustable Top Link, Rear PTO Shield, Horn, Tools Box, Standard Toolkit, Over Bonnet Pre-cleaner, Indicator Lights, Stabilizer Chains, Front end Weight Frame.
OPTIONAL EQUIPMENT:
Range of Farm Implements, PTO Pulley, 9-Hole Draw Bar, Stays, Fiber Glass Top Sun Canopy with Frame, Ground PTO, Frond End Weights, Rear View Mirror, Hydraulic Spool Valves, Swinging Draw Bar.

 

 

 

Copyright © 2011 Farmac Inc. All rights reserved.