| |
|
|
 |
MF 385 PERFORMANCE: |
| Max. Engine power @ 2,200 rpm |
85 hp* |
| Max. Torque at 1,600 engine rpm |
291 Nm |
| Max. PTO power at 2,200 |
70 hp** |
| Engine rpm |
|
| *Certified to BS AU 141a |
|
| ** Manufacturer’s Estimate |
|
MF 385 ENGINE: |
| Make/Type |
4.41
|
| No. of Cylinders |
4 |
| Injection |
Direct |
| Bore |
101 mm |
| Stroke |
127 mm |
| Capacity |
4.1 |
| Aspiration |
Natural |
| Compression Ratio |
15.3:1 |
| Starting Aid |
Thermostart |
| Throttle Control |
Hand and Foot |
| Cooling |
Water |
| Air Cleaner Type |
Oil Bath |
| Air Pre-Cleaner |
Over bonnet air swirl |
| Fuel Filter |
Dual high capacity |
| |
With sedimentor |
| Exhaust |
Vertical; muffler under bonnet |
| Oil Cooler |
Water Cooled |
MF 385 ELECTRICS: |
| Voltage |
12V, Negative Earth |
| Battery |
96 Ah |
| Alternator/Starter |
45 A/2.8 KW |
MF 385 CLUTCH: |
| Type |
Dual |
| Diameter |
305x254 mm |
| Lining Material |
Cerametallic |
MF 385 POWER TAKE - OFF: |
| Type |
Live |
| Engine Speed at 540 PTO rpm |
1,789 rpm |
| Shaft Diameter |
35 mm |
| No. of Splines |
6 |
MF 385 TYRES: |
| Front 7.50-16 (6PR) |
7.50-16 (6PR) |
| Rear 18.4 / 15-30 (6PR) |
18.4 / 15-30 (6PR) |
MF 385 TRACK ADJUSTMENT: |
| Front Axle |
1,376 - 1,944 mm |
| Rear Axle |
1,423-2,134 mm |
MF 385 STEERING: |
| Type |
Hydrostatic |
MF 385 TRANSMISSION: |
| Type |
Sliding spur |
| Number of Gears |
8 Forward, 2 Reverse |
| Road speed at 2,200 engine rpm with 18.4/15-30 rear tyres |
| Gear Speed |
(km/hr) |
| Forward 1 |
2.7 |
| Forward 2 |
3.7 |
| Forward 3 |
5.1 |
| Forward 4 |
6.8 |
| Forward 5 |
10.4 |
| Forward 6 |
15.2 |
| Forward 7 |
20.8 |
| Forward 8 |
27.9 |
| Reverse 1 |
3.5 |
| Reverse 2 |
14.1 |
MF 385 HYDRAULICS: |
| Function |
Draft , Position & Response |
| |
Control, Constant pumping |
| Pump Type |
4 Piston, Ferguson pump |
| Maximum Out put |
16.7 liters / min |
| Maximum lift capacity with Lower links horizontal |
2,145 kg |
| Maximum pressure |
21 MPa (205 bars) at Normal |
| |
Operating Temperature |
| Lower links |
Category I & II |
| |
Interchangeable balls |
MF 385 4WD FRONT AXLE: |
| Axle Type |
Parallel Drive |
| Engagement |
Mechanical |
MF 385 REAR AXLE & BRAKES: |
| Axle Type |
Straddle with epicyclic reduction |
| Brake Type |
Oil immersed, multi - disc |
| Brakes Area |
1,774 Sq. cm. |
| Brakes Actuation |
Hydraulic |
| Parking Brakes |
Hand Lever Operated |
MF 385 CAPACITIES: |
| Fuel Tank |
108 lit |
| Engine Sump |
7.5 lit |
| Air Cleaner Oil Bath |
0.7 lit |
| Cooling System |
15.2 lit |
| Hydraulic System |
47.4 lit |
| Power Steering Reservior |
2 lit |
| 4WD Front Axle Differential |
5.6 lit |
| Hub each Side |
1 lit |
MF 385 INSTRUMENTATION: |
| Gauges |
Tachometer, Hourmeter,
Fuel lever,
Water Temperature
Battery Condition |
Warming Lights |
Direction Indicators
Electric Charge,
Headlight Main Beam,
Low Engine Oil Pressure,
4WD Indication Lights
|
MF 385 WEIGHT & DIMENSIONS: |
| with 12.4-24 Front & 18.4/15-30 Rear Wheel with
Full Fuel, Oil & Water |
| Weight Front |
|
| Weight Rear |
1,429 kg |
| Weight Total |
1,582 kg |
| Dimensions |
3,011 kg |
| Overall Length |
3,810 mm |
| Width (minimum) |
1,871 mm |
| Wheel Base |
2,350 mm |
| Height |
|
| Over Exhaust |
2,485 mm |
| Over Steering Wheel |
1,781 mm |
| Turning Circle |
|
| Without Brakes |
8,518 mm |
| Ground Clearance |
|
| Under Gearbox |
501 mm |
| Under 4WD Front Axle |
395 mm |
MF 385 STANDARD EQUIPMENT: |
- Weight Frame without Weights
- Standard Tool Box with Set of Tools
- Top Link
- Cat-I & II Balls
- Check Chains
- Chain Stablisers
- Spring Suspension Seat
- Flat Top Fenders &
- Operator’s Manual |
MF 385 OPTIONAL EQUIPMENT / ACCESSORIES: |
- Cabin (A/C or Non-A/C)
- Sun Canopy (ROPS Style)
- Front Ballast/Weights
- Adjustible Pintle Hook, Simple Pintle Hook
- Swinging Drawbar, 9 Hole Drawbar
- Auto Hitch
- Hydraulic Control Outlets/Spool Valves
- External Electric Switch
- PTO Belt Pulley &
- International Warranty Tool Kit |
|
|
 |
Copyright © 2011 Farmac Inc. All rights reserved. |
|
|
