 |
ENGINE POWER: |
| At flywheel 55 HP/DIN |
ENGINE: |
| Fiat 8035.06 |
|
| 4 - Stroke, 3 Cylinders |
|
| Direct Injection Diesel, |
|
| Max. Power: |
2500 rpm 55HP/DIN (41.0 kw) |
| Max. Torque: |
1500 rpm 185NM (18.88 Kgm) |
| Dry Type Cylinder Liner |
|
| Water Cooling |
|
| Bore & Stroke: |
100 x 115 mm. |
| Piston Displacement: |
2,710 cc. |
| Compression Ratio: |
17:1 |
| Three row brass tube and copper fin radiator |
|
| Force-feed lubrication system |
|
| Distributor-type injection pump with mechanical speed governor |
|
| Four-Bearing Crankshaft |
|
| 12 Volt Starting System; 4 hp Motor |
|
| 400 Watt Alternator |
|
| 90/95 Ah Battery located in front of radiator |
|
| Gearbox Mounted Starter Safety Switch |
|
| Vertical Exhaust Muffler |
|
OPERATING WEIGHT: |
| 1,710 Kg with 6.00-16 and 12.4/11-28 Tyres, hydraulic lift with three-point linkage cat. 1-2, square type fender with flat top. |
TRANSMISSION: |
| Gearbox with Constant-Mesh Gears |
| Gears: 8 Forward 2 Reverse Speeds |
| Synchromesh: 3rd, 4th, 7th, and 8th Speeds |
| Differential with Pedal Actuated Lock and Automatic Disconnection. |
| Single-Reduction Spur Gear Final Drives. |
SPEEDS (KPH) |
| With Tyres |
|
12.4/11-28 |
| Engine speed (rpm) |
2160 |
2500 |
| PTO Speed (rpm) |
540 |
625 |
| Forward |
|
|
| First |
1.87 |
2.17 |
| Second |
2.82 |
3.26 |
| Third |
4.13 |
4.78 |
| Fourth |
5.33 |
6.17 |
| Fifth |
6.75 |
7.81 |
| Sixth |
10.15 |
11.75 |
| Seventh |
14.86 |
17.20 |
| Eight |
19.20 |
22.22 |
| Reverse |
|
|
| First |
2.69 |
3.11 |
| Second |
9.70 |
11.22 |
STEERING |
| Manual, recirculation ball type |
| Centre relay lever |
| Joints lubricated for life |
DRIVER'S SEAT |
| Fully upholstered with parallelogram suspension, adjustable to driver's weight |
FRONT AXLE |
| Telescopic type, inverted U, variable tread |
CLUTCH |
Dual Plate, dry type, with separate controls (pedal for transmission and hand lever for PTO)
Diameter of plates: 11 in. |
POWER TAKE-OFF: |
| 13/8” – 6 Spline Shaft |
| Fully Independent: 540 rpm at 2,160 Engine rpm |
| High-Speed PTO* (13/8” shaft) |
| Same Speed as Engine. |
| * Depends on belt pulley |
FILTERS |
- Air: oil-bath with precleaner and semiautomatic dust unloader
- Fuel: 2 replaceable cartridges
- Oil: easy-to-change, full-flow cartridge
Vertical exhaust muffler
Gearbox mounted starter safety switch |
TYRES |
| Front: |
6.00-16 |
| Rear: |
12.4/11-28 |
LIGHTING SYSTEM |
| With 3-position headlights; rear position and number plate lights. |
| 2-pole power connector (ASAE) |
| Blue high beam warning light on dashboard |
BRAKES |
| Service: |
dry, band-type with mechanical control |
| Parking: |
with hand lever, on right of operator |
THREADS |
| Front (8 positions) |
| 1320 - 1420 - 1520 - 1620 - 1720n - 1820 - 1920 - 2020mm |
| Rear (8 positions) |
| 1200 - 1300 - 1400 - 1500 - 1600 - 1700 - 1800 - 1900mm |
DIMENSIONS: |
| (With 6.00-16 and 12.4/11-28 tyres) |
| Wheelbase: |
1,920mm |
| Overall Length: |
2,960mm |
| Height to Top of Hood: |
1,390mm |
| Height to Steering Wheel: |
1,490mm |
| Front Tread (8 positions): |
1,320 – 2,020mm |
| Rear Tread (8 positions): |
1,200 – 1,900mm |
| Ground Clearance: |
480mm under Front Axle |
OPTIONALS |
ENGINE |
| Cold starting aid (Thermostat) |
| Radiator screen |
TRANSMISSION |
| Additional creeper speed reduction unit, for a total of 12 forward and 3 reverse speeds |
STEERING |
| Hydrostatic Power, with independent circuit |
POWER TAKE-OFF |
| 540 rpm (1 3/8" - 6 spline shaft) |
| Proportional ground speed, revolutions per approx. one metre forward travel (independently of gear engaged): 4.05 |
HYDRAULICS |
| Auxiliary control valve (right hand) for implement remote control with single or double acting rams |
TOWING ATTACHMENTS |
| Swinging drawbar Cat A |
| Linkage drawbar Cat A-C |
BELT PULLEY |
| Ground Clearance: |
480mm under Front Axle |
| Diameter: |
250mm |
| Width: |
150mm |
| Pulley speed: |
1350 rpm |
| Belt Speed: |
17.7 m/sec |
OPTIONAL EQUIPMENT: |
- Front End Weights with Frame
- PTO Pulley (AGRIPAK Design)
- DTO Pulley
- AGRIPAK SunRoof Canopy (Fiber Glass/Hard Top)
- 9 Hole Draw Bar
- Pintle/Trolley Hook (AGRIPAK Design)
- DTO Suction Pump
- High Clearance Kit |
FUEL TANK |
| Capacity: 54 liters |
HYDRAULIC LIFT |
- With draft and position control
- Draft control through top link
- Gear - type pump driven from engine crankshaft
- Pump capacity: 22.7 lit/min
- Relief valve opening pressure: 150-170 kg/sq. cm.
- 3-point linkage Cat. 1-2
- Manual response control
- Lower links with sway restrictors and transverse retaining spring
- Control lever with safety stop
- Max. lifting capacity: 1540 kg |
